Mikrotik

Новое в версии 6.35:

  • arp - apply Linux Kernel patch to stop RouterOS from randomly exhibiting misplaced ARPs
  • mipsbe - (excluding RB4xx and CRS series) fixed rare ethernet tx buffer corruption
  • nand - implemented once a week nand refresh to improve stored data integrity (will increase sector writes)
  • pppoe-client - implemented fastpath support
  • l2tp - implemented l2tp and lns fastpath/fasttrack support
  • queue - added bucket-size setting to queues (derived from max-limit)
  • tile - fixed rare situation when some cores decide not to take part in packet processing till next reboot
  • tunnels - fixed performance slowdown on any other tunnel disable/enable
  • winbox - increased minimal required winbox version to 3.4
  • wireless - added new package "wireless-rep"
  • wireless - improved 1-chain 802.11ac station compatibility with other vendor multi-chain APs
  • address-list - fixed crash in low memory situations
  • bonding - fixed crash when creating vlans on bonding interface
  • capsman - added 802.11g/n band
  • capsman - fixed capsman extension channel names
  • certificate - revoked certificates not showing as (R)evoked
  • certificate - allow manual crl url addition
  • chr - added support for VLAN on Hyper-V
  • chr - fixed Hyper-V booting from SCSI
  • chr - fixed Hyper-V on windows 8/10 reboot loop
  • chr - fixed bridge firewall
  • chr - fixed kernel crash when virtual ethernet was not connected to anything in Hyper-V
  • chr - implemented automatic storage increase on disk image size increase
  • chr - implemented kernel crash saving to autosupout.rif (will utilize additional 24Mb of RAM)
  • chr - make shutdown request from hyper-v work (might fix other hypervisor as well)
  • chr - no more installation on first boot
  • chr - try to renew expired license once a hour instead of 100h
  • cloud - don't write minor status changes to storage
  • console - fixed print follow in "/ip dns cache" menu
  • console - show RouterOS Version in /interface wireless scan
  • console - sort completions/hints in natural order
  • console - update copyright notice
  • defconf - fixed default configuration for SXT LTE
  • dhcpv6-client - fixed wrong error message
  • dhcpv6-client - fix ia expiration and lifetime validation
  • dhcpv6-server - acquire binding on renew if it does not exist
  • dude - (changes discussed here)
  • dude - fixed dude login logging, no more shows as winbox login
  • email - fixed send cmd server addr override
  • ethernet - add option to see S-GPON-ONU module, GPON side SN in "/int eth mon sfp#"
  • ethernet - do not allow to set self as master port
  • export - bonding did not show up in global export
  • export - exclude default values from export in "/interface l2tp-server server" menu
  • export - fixed export when ipv6 address was taken from pool
  • export - fixed rare situations when not whole config was exported
  • export - updated defaults for compact export
  • fastpath - fixed crash when packet arrives on disabled interface
  • fastpath - fixed show rx-bits-per-second on all VLAN interfaces
  • fastpath - improved vlan fastpath
  • fasttrack - fixed timer updating in connections table for fasttrack connections
  • fetch - decrease connection idle timeout
  • firewall - added experimental "action=route" in mangle prerouting - that forces packets to specific gateway by ignoring routing decisions (CLI only)
  • health - always report fan speed (even if it is 0)
  • health - swap fan2 and fan3 on CCR1072
  • hotspot - clean-up all dead entries at once
  • hotspot - fixed possible deadlock
  • hotspot - improved html page resistance against attacks
  • hotspot - make video tag work properly on hotspot login.html page
  • ip - rename max-arp-entries to less confusing max-neighbor-entries
  • ippool6 - fixed potential crash
  • ipsec - always re-key ph1 because it was possible that ph1 without DPD would expire
  • ipsec - better flush on proposal change
  • ipsec - fixed crash on policy update
  • ipsec - fixed fast ph2 SA addition
  • ipsec - fixed larval SA refresh for display
  • ipsec - fixed multiple consecutive dynamic policy flush
  • l2tp & pppoe - fixed user traffic accounting when fastpath was used
  • l2tp - introduced per tunnel allow-fast-path option
  • l2tp - added support for Hidden AVP, it is needed for proxy authentication
  • l2tp - added support for max-sessions
  • l2tp - added support for proxy authentication when receiving forwarded PPPoE sessions
  • l2tp - fixed small memory leak on reconnects
  • lcd - fixed branding packet logo drawing on startup
  • led - fixed crash on assigned interface removal
  • led - turn on fault led on CCR1072 if CPU too hot
  • leds - fixed AP-CAP led blinking after successful association to CAPsMAN
  • lte - added ipv6 support for SXT LTE
  • lte - changed AT command processing
  • lte - changed AT parsing because supported Huawei modems use unsolicited events instead of polling
  • lte - fixed bandlux modem dialing
  • lte - fixed crash on early initialization
  • lte - improve situation when SXT modem never finds operator
  • lte - replaced signal-strength with rssi in info command
  • lte - support Alt38XX modem
  • lte - support for zte mf820s2
  • lte - supported modems now use unsolicited events for network monitoring
  • lte - use timer for modem info
  • map lite - added hardware WPS button support
  • mpls - do not reset VPLS on TE tunnel re-optimize
  • ntp - fixed ntp client hangs in reached state
  • ospf - fixed crash when getting neighbor router-id in NBMA area
  • ppp - fixed ppp interface reconnect when uPnP was used
  • ppp - close connection if peer wants to re-authenticate
  • ppp - fixed memory leak high number of pppoe clients to the same server
  • ppp - fixed ppp crash if lcp packets were lost and authentication got delayed
  • ppp - fixed some clients can not connect due to LCP restart
  • pppoe - added rfc4679 support
  • pppoe - fixed crash when removing pppoe service
  • pppoe-server - added pado-delay option
  • profiler - classify certificate signing
  • proxy - fixed ftp request url decode
  • queue - improve "/queue interface" menu
  • quickset - fixed invalid date adjusted the signal threshold for the signal chart and refresh rate
  • quickset - fixed situations when hidden password was passed as ******* from winbox nd webfig
  • radius - warn radius client if incorrect secret is being used
  • rb3011 - fixed sfp compatibility with CCR when using direct attached cables
  • rb3011 - fixed time keeping
  • rb3011 - make ether6-ether10 work if SFP module is present on bootup
  • romon-ssh - fixed active addresses for romon user
  • route - do not show duplicate gateway on connected route
  • route - fixed filter by routing table
  • routing - fixed rare kernel failure on different dynamic routing configurations
  • routing - fixed routing-marks were not erased from memory when they are not being used
  • services - do not show ssh entry under ip services if security package is disabled
  • snmp - don't group oids for bulk get with maxreps > 1
  • snmp - fixed cpu load reporting to 1min average and change oid to 1.3.6.1.4.1.2021.11.10.0
  • snmp - fixed dhcpv4 lease hwaddr format according to mib
  • snmp - fixed getbulk result ordering with multiple request OIDs
  • ssh - simplify login process
  • ssl - optimized certificate update
  • system - log time changes
  • tile - corrected max-l2mtu
  • tile - fixed fastpath related memory leak
  • tile - fixed performance regression on switch chip (introduced in 6.33rc18)
  • tile-crypto - fixed minor memory leak
  • tool fetch - fixed https cleanup on user stop while handshaking
  • trafficgen - fixed console arguments
  • trafficgen - fixed crash when unexpected stream reappears
  • trafflow - fixed potential deadlock
  • ups - fixed entering hibernate mode when below battery capacity limit
  • users - added separate RoMoN policy
  • webfig - fixed firewall rule sorting did not work in other chains except all
  • webfig - show single item groups as optional values
  • webfig - sort numeric columns numerically even if they contain some text
  • winbox - added "pw-type" to "/interface vpls bgp-vpls" menu
  • winbox - added "use-control-word" and "pw-mtu" to "/interface vpls cisco-bgp-vpls" menu
  • winbox - added /interface wireless setup-repeater
  • winbox - added all the rates settings to the capsman
  • winbox - added flip-screen option to lcd settings
  • winbox - added init-delay option to routerboard settings
  • winbox - added ipv6 firewall missing log option
  • winbox - added missing eap-ttls-mschamv2 method to wireless security profile
  • winbox - added mtu=auto support to eoipv6 tunnel
  • winbox - added sfp-mac for GPON interfaces
  • winbox - added support for new settings from wireless-rep package
  • winbox - added support for route action in mangle rules
  • winbox - allow to set additional-network-modes
  • winbox - allow to set multiple dh-groups
  • winbox - disable autostart for wireless scan,snooper,align etc. on open
  • winbox - do not show "enable-jumper-reset" setting on devices without serial port
  • winbox - do not show real-tx-power column in current-tx-power by default
  • winbox - fixed unset options in /routing ospf interface menu
  • winbox - hotspot default-trial user shows profile as "unknown" in Winbox
  • winbox - improved winbox connection loss detection, fixes winbox safe mode
  • winbox - limit ospf key to 16 symbols
  • winbox - make additional-network-mode optional for lte interface
  • winbox - make build with latest lte changes
  • winbox - make mrru disabled and set mtu+mru to auto by default on new servers
  • winbox - show "usb-power-reset" option on all boards that have it
  • wireless - fixed crash on nstreme-dual interface stats update
  • wireless-rep - added 802.11g/n only band
  • wireless-rep - added STEP feature for the scan-list
  • wireless-rep - added WPS client support
  • wireless-rep - added support for saving wireless scan results to file
  • wireless-rep - added support for wireless background scan for 802.11 protocol
  • wireless-rep - added support for wireless repeater mode for 802.11 protocol
  • wireless-rep - added support for wireless scan rounds setting
  • wireless-rep - adjust roaming scan times
  • wireless-rep - allow to connect to AP after scan
  • wireless-rep - do not allow empty ssid for AP modes
  • wireless-rep - fixed crash on non-HT clients
  • wireless-rep - fixed latency issues with Intel wireless clients
  • wireless-rep - fixed nv2 protocol
  • wireless-rep - fixed qos frame-priority when nv2 protocol used in station-wds mode
  • wireless-rep - fixed signal leds
  • wireless-rep - fixed speed issue when connected with Intel 802.11ac
  • wireless-rep - initial support for station roaming for station mode in 802.11 protocol
  • wireless-rep - request interface name for setup-repeater
  • wireless-rep - use full identity where possible
  • wireless-rep,capsman - added more configuration settings
  • wireless-rep,capsman - added rate config support

Страница загрузки