Mikrotik

Список изменений в версии 6.33:
  • dns - initial fix for situation when dynamic dns servers could disappear
  • winbox - dropped support for winbox v3.0beta and v3.0rc (use winbox v3.0)
  • dhcpv6 - various improvement and fixes for dhcp-pd client and ippool6
  • defconf - fixed rare situation where configuration was only partially loaded
  • net - fix possible never ending loop when bad CDP discovery packet is received
  • log - make default disk file name to reside in flash dir if it exists
  • romon - change port list to be not ordered in export
  • capsman - limit number of simultaneous DTLS handshakes
  • capsman - fixed memory leak on CAP joining CAPsMAN when ssld is used
  • winbox - added allow-fast-path to eoip, gre & ipip
  • winbox - do not show power-cycle properties on non poe ports
  • l2tp: implemented PPPoE over L2TP in LNS mode, RFC3817
  • webfig - some of the setting were shifted to the right
  • packages - allow to reinstall from bundle to separate packages & vice versa
  • packages - prefer out of bundle packages when both of them are installed
  • packages - fix a problem of upgrading bundle package to non bundled ones
  • ipsec - force flow cache validation once in 1h
  • winbox - make sure that all setting names get shown in full
  • winbox - added poe power-cycle-ping settings to ethernet interfaces
  • ppp - handle properly case were ppp client is given same address for local & remote end
  • winbox - added vlan-mode & vlan-id to virtual-ap interface
  • winbox - added timeout column to ipv6 address lists
  • winbox - show SFP Tx/Rx Power properly
  • winbox - added min-links to bonding interface
  • winbox - do not show health menu on RB951Ui-2HnD
  • winbox - added support for Login-Timeout & MAC-Auth-Mode in hotspot
  • cerm - added option to disable crl download in '/certificate settings'
  • winbox - make user ssh key import work again
  • webfig - make "Copy to Access List" work in CAPsMAN Registration Table
  • userman - fix report generation problem which could result in some users being skipped from it
  • winbox - fix to allow cpu-port as mirror-target
  • proxy - error.html parsing enhancement to improve performance
  • CCR1072 - improve ether1 performance under heavy load
  • routerboard - indicate RouterBOOT type in /system routerboard print
  • mpls - properly use mpls mtu for routes
  • cerm - fix key description for signed certificates
  • trafflow - report flow addresses in v1 and v5 without NAT awareness
  • hotspot - add mac-auth-mode setting for mac-as-passwd option
  • hotspot - add login-timeout setting to force login for unauth hosts
  • auto-upgrade - fixed auto upgrade for smipsbe
  • dns - do not create duplicate entries for same dynamic dns server addresses
  • ipsec - fix set on multiple policies which could result in adding non existent dynamic policies to the list
  • email - allow server to be specified as fqdn which is resolved on each send
  • fastpath - eoip,gre,ipip tunnels support fastpath (new per tunnel setting "allow-fast-path")
  • ppp, pptp, l2tp, pppoe - fix ppp compression related crashes
  • cerm - also accept downloaded CRLs in PEM format
  • userman - added 'history clear' to allow flushing undo history, which may take up significant amount of memory for huge databases with hundreds of users
  • health - fix voltage for CRS109, CRS112 and CRS210 if powered from external adapter
  • userman - added phone number support to signup form
  • ip pool6 - try to acquire the same prefix if info matches recently freed
  • ipsec - fix transport mode ph2 ID ports when policy selects specific ip protocol on initiator
  • ipsec - use local-address for phase 1 matching and initiation
  • route - fixed crash on removing route that was aggregated
  • ipsec - fix replay window, was accidentally disabled since version 6.30
  • ssh - allow host key import/export
  • ssh - use 2048bit RSA host key when strong-crypto enabled
  • ssh - support RSA keys for user authentication
  • wlan - improved WMM-PowerSave support in wireless-cm2 package
  • pptp & l2tp - fixed problem where android client could not connect if both dns names were not provided (was broken since v6.30)
  • auto-upgrade - added ability to select which versions to select when upgrading
  • quickset - fixed HomeAP mode
  • lte - improved modem identification to better support multiple identical modems
  • snmp - fix system scripts table
  • tunnels - eoip,eoipv6,gre,gre6,ipip,ipipv6,6to4 tunnels now support dns name as remote address
  • fastpath - active mac-winbox or mac-telnet session no longer suspends fastpath
  • fastpath - added per interface fastpath counters
  • fastpath - added trafflow support in basic ipv4 and fasttrack ipv4 fastpath
  • ppp - added on-up & on-down scripts to ppp profile
  • winbox - allow to specify dns name in all the tunnels
  • pppoe - added support for MTU > 1492 on PPPoE
  • cerm - fix scep server certificate-reply degenerate PKCS#7 signed-data content
  • ppp-client - added default channels for Alcatel OneTouch L100V
  • defconf - fix for boards that had bridge with only wlan ports
  • ovpn: support OpenWRT ovpn clients (or any other with enable-small option enabled)
  • cerm - use certificate file name for imported cert name
  • fetch - fixed error message when error code 200 was received
  • cerm - rebuild crl for local ca if crl file does not exist
  • winbox - make directed broadcasts work for neighbor discovery
  • upnp: automatically adjust mappings to new external ip change
  • ppp - added ppp interface to upnp internals/externals if requested
  • ppp - when adding ipv6 default route use user provided distance
  • userman - allow to correctly enable CoA on router
  • cerm - show crl nextupdate time
  • ppp - added CoA support to PPPoE, PPTP & L2TP (Mikrotik-Recv-Limit, Mikrotik-Xmit-Limit, Mikrotik-Rate-Limit, Ascend-Data-Rate, Ascend-XMit-Rate, Session-Timeout)
  • ppp - added new option under "ppp aaa" - "use-circuit-id-in-nas-port-id"
  • userman - refresh active sessions/users view dynamically
  • package - added version tag and show everywhere alongside of version number
  • wlan - improved 802.11 protocol single connection TCP performance for ac chipset with cm2 package

Страница загрузки